Hey - did you know if you click on the title of a thread it will take you to the first unread post since you last visited that thread?
but were afraid to ask: 
STOP!! Never post your email address in open forums. Bots can "harvest" your email! If you must share your email use a Private Message or use the 
smilie in place of the real @
Pretty Please - add it to our Events forum(s) and add to the calendar! >> 
The turn signals have stopped working and I know it's an issue this assembly. I have had the long wiring tube out before and I am familiar with the grub screws an how the long tube slots into the stator tube. Looking at the back of the horn button assembly there is a moveable plate with a 2 pronged extension on it. I believe this extension is to be situated 180 degrees from the turn signal switch. On the grey metal part behind the plate there looks like a groove that is either a "stop" for that extension piece or maybe the extension piece is supposed to fit in that groove and i assembled it wrong the last time I was in there??? Does anyone have a picture of this area and also a link to the assembly dismantling ? Thanks Karl
-
Hey Guest!
British Car Forum has been supporting enthusiasts for over 25 years by providing a great place to share our love for British cars. You can support our efforts by upgrading your membership for less than the dues of most car clubs. There are some perks with a member upgrade!**Upgrade Now**
(PS: Upgraded members don't see this banner, nor will you see the Google ads that appear on the site.)
TR2/3/3A The horn and turn signal assembly.
- Thread starter karls59tr
- Start date
Share this page
Karl, here are a couple of good links:
drive.google.com
Hope this helps,
Bob
TR3 Control Head-disassemble - Clive Elsdon.pdf
drive.google.com
Hope this helps,
Bob
