• Hi Guest!
    If you appreciate British Car Forum and our 25 years of supporting British car enthusiasts with technical and anicdotal information, collected from our thousands of great members, please support us with a low-cost subscription. You can become a supporting member for less than the dues of most car clubs.
    There are some perks with a member upgrade!
    **Upgrade Now**
    (PS: Subscribers don't see this gawd-aweful banner
Tips
Tips

The Holy Sprite is painted

Share this page

That's the only color a Holy Sprite could be painted.....
 
Nice one Frank.
 
That looks great!

Man, you are really buckin' for that "Get out of heck free" card.
 
Lookin' mighty good there.
 
tony barnhill said:
That's the only color a Holy Sprite could be painted.....
Click to expand...

White Holy Smoke - did they just elect a Pope? :angel:
 
Well done on that. Our midget will be a similar color. With that in mind...

What are you going to do about the wheel wells and the underside of the car? My current thought is to paint it with POR-15 because it will be easy to touch up if something happens--that and it doesn't require a primer.

--Chris
 
Looks good Frank. You only wear a filter mask when spraying? What kind of paint?
 
Nicely done as always, Frank. You're doing the Holy Sprite proud.
 
Really nice work!! But why is the guy in pic535 trying to kill that poor little car with that strange looking gun??! :laugh:
 
You know white bed liner is great for underside and wheel wells long as you are not after a factory car.
 
I use rubberized undercoating inside all the wheel wells.
I just don't like the look of clean painted wheel wells, and besides, 1 puddle and they are now dirty.
If it was a concours car, that's different. But a daily driver especially one that lives 2 miles from the ocean will have undercoat everywhere.
Fr Jack lives 2 houses from the ocean so we have taken all kinds of precautions for rust.
Rust inhibitor inside all the box frames and sills, Phosphoric acid wash befor etch primer, etc.
 
Actually the factory used undercoating inside the rear wheel wells then paint over it body color to cut down on the noise from the rear.
 
Am I the only one who feels amazingly slow on their progress now? :smile: Seems like only a week ago I was looking at pics of this car on its journey across the states..and now its painted!
Great work..and fast! don't see that very often!
 
We opted to keep the rear springs on the car, they are in good condition and the car sat level. No paint on the shelves because we aimed the paint gun at the car, not the shelves :wink: There is probably overspray on everything in the garage, there always is. But it's a garage, nothing that can't get a little paint on it.
the floor changes colors with every car I paint!
As for the assembly weekend, that is Nov 8th & 9th, the car will be real close to finished that weekend. Interior panels are made, vinyl is in a roll ready to be glued on the panels, seats are at the upholster shop. Engine and trans are ready to drop in, rear axle is all rebuild and ready, carpet is here and ready to be installed as are all the other parts. It's just a matter of putting all the pieces back on the car. I will wet sand and buff the car this weekend, maybe get to covering the interior panels and making new door pockets. My wife is sewing the carpet pieces and making something to replace the ribbed rubber door liner since we could not find anything in blue, she is making vinyl over foam with stitching lines in it so it has some character.
Everyone is welcome for the assembly weekend in Toms River, NJ on 9/8, just let me know.
 
Back
Top