Hey Guest!
Hey - did you know if you click on the title of a thread it will take you to the first unread post since you last visited that thread?
but were afraid to ask: 
STOP!! Never post your email address in open forums. Bots can "harvest" your email! If you must share your email use a Private Message or use the 
smilie in place of the real @
Pretty Please - add it to our Events forum(s) and add to the calendar! >> 
Hi Everyone.
Just completing a rebuild of a BJ8 Dash and Trafficator. While testing the steering wheel, I noticed quite a groaning noise upon moving the steering wheel back and forth.
The noise does not appear to be from the steering box which I just adjusted, but rather higher up the column near the clamp bolt that holds the column under the dash. I removed the dust cap that seats the small end of the adjustable wheel's dust cover. Under this it appears that there is a felt bush. I don't think I want to stick oil down there to eliminate the problem.
Is it possible that I have over tightened the steering column clamp? Can that felt bush be removed without dismantling the whole column? Any other tricks in Healey land for the groaning wheel?
- Andrew 1-
Just completing a rebuild of a BJ8 Dash and Trafficator. While testing the steering wheel, I noticed quite a groaning noise upon moving the steering wheel back and forth.
The noise does not appear to be from the steering box which I just adjusted, but rather higher up the column near the clamp bolt that holds the column under the dash. I removed the dust cap that seats the small end of the adjustable wheel's dust cover. Under this it appears that there is a felt bush. I don't think I want to stick oil down there to eliminate the problem.
Is it possible that I have over tightened the steering column clamp? Can that felt bush be removed without dismantling the whole column? Any other tricks in Healey land for the groaning wheel?
- Andrew 1-
