T-Series TF Engine Lift Points for 5 speed conversion

[CCURTISS]

I am getting ready to install a Moss 5 speed conversion in our TF and I have a question. To do this kit I need to replace the motor mount and I was wondering what the best locations are to tie the lift chains to in order lift the engine with a crain.

Does anyone have pictures?

Thanks,

 

[David_DuBois]

If you have the Moss adapter, it can be attached to the front and rear rocker towers and lifted with that, otherwise a strap around the front and rear of the engine. There is a picture in the shop manual.
Cheers,

 

[tony barnhill]

Like Dave said - those 2 bolts that hold the valve cover on car are where I lift all my engines...the 2 little adapters I use are just a metal "L" with holes for the stud & a chain.

 

[CCURTISS]

Looking at the valve cover bolts I thought they were a little small but from everything I have seen that is what it seems we use.

Thanks!