• Hey Guest!
    British Car Forum has been supporting enthusiasts for over 25 years by providing a great place to share our love for British cars. You can support our efforts by upgrading your membership for less than the dues of most car clubs. There are some perks with a member upgrade!
    **Upgrade Now**
    (PS: Upgraded members don't see this banner, nor will you see the Google ads that appear on the site.)
Tips
Tips

Wedge Tapered coolant hose for a PI car.

Share this page

Got_All_4

Got_All_4

Luke Skywalker
Country flag
Offline
Anyone know where to get a better on of these? Mine is around 3 years old and is split and leaking already. I'm sure I got it from moss.

071-213_1.jpg
 
Poke around and see if you can find the Gates molded hose catalog online. I don't have it handy, but there is one that lists dimensions (diameter each end, length, angle, etc) for a whole bunch of heavy duty (truck) hoses.
 
Not specific for that hose on that vehicle, but, there are heater or bypass hoses with different diameters at each end, that are long, or have angles at the ends.
If you measure both ends ID, you can cut the part out you need.
Then you get something made from other than British Rubber.
 
Back
Top