Tach needing repair

[donbmw]

My tach has quit and it is not the cable. Who have you used to repair you instruments.

Don

 

[brgrmyster]

Don,
I've used Nisonger Instruments of New York twice, once on a TR6 tach, and then on a GT6 tach that had to be entirely rebuilt as the PO had converted it to electric drive. Their work is top shelf. They are not cheap, however, charging a flat price irrespective of what is required. They go through the whole thing and fully restore it to perfection.

Jeff

 

[hondo402000]

Don I used them too, and they also refurbised my Tach on my TR6, prior it bounced around at idle, now it steady as a rock at all RPM's, call them first and talk to them, then send it and put explicit instruction in the box as to what you want done


Hondo

 

[sail]

put explicit instruction in the box as to what you want done

Although they repaired my speedo fine they did not follow my simple instructions or respond to my inquiry.

 

[Gordon_Dedrick]

I have used both Nisonger as well as West Valley Auto Electronics in Reseda, Ca with fine results. West Valley was quite a bit quicker, however. You are in the middle of the country..........take your choice1
Gordon

 

[Dale]

I'm not sure if they apply here, but I have used MO-MA in Alburquerque, NM with good results.

 

[Brosky]

West Valley did a great job on my instruments. It's on my website.

 

[donbmw]

Thanks all

 

[Rrbbeerrttoo]

Foreign Speedo, Inc in San Diego ( 619 298 5278 ) recently repaired my Smith/Jagger mechanical tach. The magnet assembly was replaced. Total price, $ 115.00
It looks and functions fine , although have no way if they did a Great job. The face looks new, no longer faded, but now looks darker ( perhaps same as when it was new ) which made other instruments not look the same. I suggest asking how the face will be cleaned, polished,etc , so you can duplicate/match the others instruments.

Robert
66' Tr4a Irs