• Hi Guest!
    You can help ensure that British Car Forum (BCF) continues to provide a great place to engage in the British car hobby! If you find BCF a beneficial community, please consider supporting our efforts with a subscription.
    There are some perks with a member upgrade!
    **Upgrade Now**
    (PS: Subscribers don't see this gawd-aweful banner
Tips
Tips

Sway bar bushing replace

Share this page

A

aroostok

Jedi Hopeful
Offline
Putting a sway bar on the front of the 76B. Got a 5/8" bar and urethane bushings from Moss. Have no idea how to press these things in. Do I need an NFL tackle or guard on one very big vise to do it. Outside diameter of lips on the bushings are just shy of an inch and a quarter. Size of hole going in to is about 31/323". Somebody supply wrong parts? Or do I just need a big vice and a body building program?
Thanks.
 
Lube will be your best friend here! Lithium grease, WD40, Soap soap soap soap water and soap, "personal" lubricants.... etc. They'll all help. /ubbthreads/images/graemlins/thumbsup.gif
 
and a pocket Schwartzenager would be handy too... /ubbthreads/images/graemlins/jester.gif
 
I found a large vice helpful. I also used a rat tail file to take the edge off the inner circle of the sway bar. I had about given up when they finally went in. Just keep at it.
 
Back
Top