Hey - did you know if you click on the title of a thread it will take you to the first unread post since you last visited that thread?
but were afraid to ask: 
STOP!! Never post your email address in open forums. Bots can "harvest" your email! If you must share your email use a Private Message or use the 
smilie in place of the real @
Pretty Please - add it to our Events forum(s) and add to the calendar! >> 
Just installed a set of new SU HS6 Carbs on my 74.5 TR6. I did the same conversion on a previous Tr6 with no issues. The car will not run with the hoses connected to the float bowl vents. It almost seems as if the issue must be with the charcoal canister? Any guidance is greatly appreciated!
-
Hi Guest!
You can help ensure that British Car Forum (BCF) continues to provide a great place to engage in the British car hobby! If you find BCF a beneficial community, please consider supporting our efforts with a subscription.
There are some perks with a member upgrade!**Upgrade Now**
(PS: Subscribers don't see this gawd-aweful banner
TR6 SU HS6 Emissions
- Thread starter brettxian
- Start date
Share this page
charleyf
Luke Skywalker
Offline
There must be some air restriction with that canister system. I have found that the float bowl must have open air access. If you must use the canister is there some way to put a T in the line to relieve any + or - pressure?
Charley
