• Hey Guest!
    British Car Forum has been supporting enthusiasts for over 25 years by providing a great place to share our love for British cars. You can support our efforts by upgrading your membership for less than the dues of most car clubs. There are some perks with a member upgrade!
    **Upgrade Now**
    (PS: Upgraded members don't see this banner, nor will you see the Google ads that appear on the site.)
Tips
Tips

TR2/3/3A SU horizontal carb linkage rod?

Share this page

Are you talking about the throttle link to the firewall, or the link between the choke levers?

His do you know it needs to be adjusted?
 
TR3driver said:
Are you talking about the throttle link to the firewall, or the link between the choke levers?

His do you know it needs to be adjusted?[/QUOTEThe
The throttle link to the firewall. The small plunger and spring at one end of the rod have gone missing and the round knobs(terminology?) that fit into the link ends are worn out of shape. I have a new throttle link rod on order. My guess is I just adjust the threaded rod until I get full throttle opening when the pedal is all the way down but just wondered if there was a stock measurement for it if everything else in the linkage was set up properly.
Click to expand...
 
Yes, set it so the throttle comes to just full open with the pedal against the stop. I don't know of any standard measurement.
 
Back
Top