Hey Guest!
Hey - did you know if you click on the title of a thread it will take you to the first unread post since you last visited that thread?
but were afraid to ask: 
STOP!! Never post your email address in open forums. Bots can "harvest" your email! If you must share your email use a Private Message or use the 
smilie in place of the real @
Pretty Please - add it to our Events forum(s) and add to the calendar! >> 
All:
I have a pair of HS2 carbs. I purchased a rebuild kit from British Parts Northwest (highly recommend) and it included a replacement needle that has a flange near the end (not the tip end0. I loosened and removed the set screw from the side of the piston, but the needle did not slide out. The needle moves in slightly against a spring, but won't come free. Can someone explain to me the method for removing this type needle?
Thanks,
Mike
I have a pair of HS2 carbs. I purchased a rebuild kit from British Parts Northwest (highly recommend) and it included a replacement needle that has a flange near the end (not the tip end0. I loosened and removed the set screw from the side of the piston, but the needle did not slide out. The needle moves in slightly against a spring, but won't come free. Can someone explain to me the method for removing this type needle?
Thanks,
Mike
