-
Hi Guest!
You can help ensure that British Car Forum (BCF) continues to provide a great place to engage in the British car hobby! If you find BCF a beneficial community, please consider supporting our efforts with a subscription.
There are some perks with a member upgrade!**Upgrade Now**
(PS: Subscribers don't see this gawd-aweful banner
Hey - did you know if you click on the title of a thread it will take you to the first unread post since you last visited that thread?
but were afraid to ask: 
STOP!! Never post your email address in open forums. Bots can "harvest" your email! If you must share your email use a Private Message or use the 
smilie in place of the real @
Pretty Please - add it to our Events forum(s) and add to the calendar! >> 
TR2/3/3A Su carb rod linkage bell crank stud?
- Thread starter karls59tr
- Start date
Share this page
mrv8q
Luke Skywalker
Offline
From the way back file....
https://www.britishcarforum.com/bcf...R6-carb-quot-ball-joints-quot&highlight=Mrv8q
https://www.britishcarforum.com/bcf...R6-carb-quot-ball-joints-quot&highlight=Mrv8q
Roger
Luke Skywalker
Offline
I'm pretty sure Burlen can sell you nice new ones. https://burlen.co.uk
Well Burlands has them for ÂŁ2.34 each and shipping is ÂŁ12.50!!!!!:grumpy:
They are 2BA thread with a 5/16 ball......I wonder if the TRF TR6 ones mentioned are the same size as the TR3 ones?
CJD
Yoda
Offline
I'm embarrassed to admit this...but I "rebuilt" my studs recently. I ordered new studs with linkages from Moss, and then TRF, but the rods with studs were a completely different style than the original. So I returned them. Then I welded up the flat worn areas on the old studs, chucked them in a hand drill and spun them as I used a bench grinder to reshape the ball. They came out perfect, but what a lot of time in ordering, returning, welding, and grinding!