Stupid question

[bugedd]

https://www.ebay.com/itm/331346599915?_trksid=p2060778.m1438.l2649&ssPageName=STRK:MEBIDX:IT

Thinking into the future, whatever Sprite I end up getting will have a 1275 in it and I will want limited slip. This rear end seems appealing, but I do have a dumb question. It says in the description that there is no side fill plug. Well then how the heck do you fill it, and know how much to fill it?

 

[David_Doan]

There's 3 plugs total. Fill and drain on the axle case and a fill on the diff assembly. Not having the side fill plug on the diff will not be a problem.

In the pic below your can see the drain and fill holes in the axle housing.

Below you can see the fill hole on the diff housing. I have never even been able to get mine out.

 

[bugedd]

Thanks David!

 

[Billm]

Do remember that some (I don't remember which, early ones I think) rear axles do NOT have that rear fill plug.
You just need to verify that your's (when you get it) does
BillM