• Hi Guest!
    You can help ensure that British Car Forum (BCF) continues to provide a great place to engage in the British car hobby! If you find BCF a beneficial community, please consider supporting our efforts with a subscription.
    There are some perks with a member upgrade!
    **Upgrade Now**
    (PS: Subscribers don't see this gawd-aweful banner
Tips
Tips

T-Series Stubborn Clutch hard line

Share this page

vping

vping

Yoda
Silver
Country flag
Offline
So I'm tyring to replace the clutch slave and hose but I cannot get the hardline off the fitting that attaches to the body. I've been soaking in PB and even hit it with the smoke wrench and no can budge. Any ideas?

I'm really hoping not to have to replace the entre hardline. I replaced it in my GT and no biggie but a really comsumer of time which I do not have right now.
 
They can be frustrating, but Blaster and "crows-foot" line wrenches have always worked for me.
 
I just went through that same process. I wound up cutting the hose, and clamping the hose part with some vice grips wedged against the body. Then I could get the line undone without the entire thing spinning.

I wish they had used a hose retainer like they have on the brake hoses.
 
Back
Top