Hey - did you know if you click on the title of a thread it will take you to the first unread post since you last visited that thread?
but were afraid to ask: 
STOP!! Never post your email address in open forums. Bots can "harvest" your email! If you must share your email use a Private Message or use the 
smilie in place of the real @
Pretty Please - add it to our Events forum(s) and add to the calendar! >> 
I am going to service the steering rack in my 1975 TR6. I do not recognize the cap that is on the rack. Does anyone know what tool I need to remove the cap? I want to put a grease nipple on it. See the picture below. One is of the stock cap I expect to find, and the other is the cap I have.
-
Hi Guest!
If you appreciate British Car Forum and our 25 years of supporting British car enthusiasts with technical and anicdotal information, collected from our thousands of great members, please support us with a low-cost subscription. You can become a supporting member for less than the dues of most car clubs.
There are some perks with a member upgrade!**Upgrade Now**
(PS: Subscribers don't see this gawd-aweful banner
TR6 Strange Steering Rack Cap
- Thread starter Erlking
- Start date
Share this page
Erking, I do not believe the plugs you have highlighted are one in the same.
The cap you have highlighted (left) is on top of the rack and I believe includes a plunger and and spring.
The cap in the picture (right) appears to be the opposite end of the input shaft. I believe post disassembly you can remove it if you need to by pushing it our from the inside.... I have redone mine. I do not remember moving this cap.
The cap you have highlighted (left) is on top of the rack and I believe includes a plunger and and spring.
The cap in the picture (right) appears to be the opposite end of the input shaft. I believe post disassembly you can remove it if you need to by pushing it our from the inside.... I have redone mine. I do not remember moving this cap.
You are quite right, they are not the same. After a lot of research and gnashing of teeth, I have discovered that this particular rack is not original. For this rack "lubrication technology has moved on since the TR4-4A was in production. The new racks are pre-lubed for life with a special grease". I no longer plan to open it up.