Hi Guest!
Hey - did you know if you click on the title of a thread it will take you to the first unread post since you last visited that thread?
but were afraid to ask: 
STOP!! Never post your email address in open forums. Bots can "harvest" your email! If you must share your email use a Private Message or use the 
smilie in place of the real @
Pretty Please - add it to our Events forum(s) and add to the calendar! >> 
Tearful Owner
Freshman Member
Offline
Have posted several times with some success so I'm trying again. My 1971 TR6 is in a chronic state of issues, as many know fix one another one crops up. But I'm finding myself reinventing the wheel because parts I've replaced (new) seem to go bad and I'm back at it again. Enough said.
I recently (last September or so) put a new steering lock mechanism and ignition switch in my TR; however, recently, while trying to sort out bad light switch and turn signal wiring I was stalled as suddenly my ignition switch stopped pushing current thru. The headlights et al won't work without a current flowing from the ignitiion. Also the car wouldn't turn over to even think of starting. Bought a new switch and after taking out the one in there I found that the key won't turn in the ignition lock now. Have no clue what could be wrong. Check manual for re-fitting and it doesn't mention anything. I place the new switch into the back of the steering lock mechanism and the key still wouldn't turn. Any ideas . Thanks in advance.
I recently (last September or so) put a new steering lock mechanism and ignition switch in my TR; however, recently, while trying to sort out bad light switch and turn signal wiring I was stalled as suddenly my ignition switch stopped pushing current thru. The headlights et al won't work without a current flowing from the ignitiion. Also the car wouldn't turn over to even think of starting. Bought a new switch and after taking out the one in there I found that the key won't turn in the ignition lock now. Have no clue what could be wrong. Check manual for re-fitting and it doesn't mention anything. I place the new switch into the back of the steering lock mechanism and the key still wouldn't turn. Any ideas . Thanks in advance.
