Hi Guest!
Hey - did you know if you click on the title of a thread it will take you to the first unread post since you last visited that thread?
but were afraid to ask: 
STOP!! Never post your email address in open forums. Bots can "harvest" your email! If you must share your email use a Private Message or use the 
smilie in place of the real @
Pretty Please - add it to our Events forum(s) and add to the calendar! >> 
twas_brillig
Jedi Knight
Offline
We have a 1962 BJ7 with a Moto-Lita steering wheel. With the 'locking' collar completely loosened, I can pull the steering wheel rearwards until there is 6 1/2" between the dash (adjacent to the signal light flasher) and the rear of the flange on the steering wheel. Pushing it all the way in and snugging up the collar leaves 4 5/8" clearance.
My buddy remembers his fingers hitting the dash padding years ago when the wheel was pushed all the way forward. A flashlight inspection underneath didn't show anything out of the ordinary, and the dust looks pretty much undisturbed. The coiled spring cover movement also looks okay.
So, advice on movement and steering wheel clearance-to-dash requested. Thanks, Doug
My buddy remembers his fingers hitting the dash padding years ago when the wheel was pushed all the way forward. A flashlight inspection underneath didn't show anything out of the ordinary, and the dust looks pretty much undisturbed. The coiled spring cover movement also looks okay.
So, advice on movement and steering wheel clearance-to-dash requested. Thanks, Doug