• Hi Guest!
    If you appreciate British Car Forum and our 25 years of supporting British car enthusiasts with technical and anicdotal information, collected from our thousands of great members, please support us with a low-cost subscription. You can become a supporting member for less than the dues of most car clubs.
    There are some perks with a member upgrade!
    **Upgrade Now**
    (PS: Subscribers don't see this gawd-aweful banner
Tips
Tips

steering rack attachment

Share this page

TulsaFred

TulsaFred

Jedi Warrior
Country flag
Offline
When I took the steering rack off my B/E I found a steel spacer/shim (pretty thick) between the bracket and the frame, but only on the right side. The left side was just flush against the frame crossmember.
Was this added for some unknown reason by a p.o. or is it supposed to be there?
Both sides or just one?

thanks
Fred
 
It is supposed to be there only on that side. It is needed to line the steering column with the pinion.
 
Thanks Trevor!

Fred
 
I put my rack back in about 2 months ago. Even though my disassembly notes said the shim went on the right, I've doubted myself. Thanks for both the question and answer.
 
That shim improperly installed will also result in your rack locking up. It is iomportant to make sure you've got full lock to lock turning capability.That shim is there for a reason.
 
Back
Top