Hey - did you know if you click on the title of a thread it will take you to the first unread post since you last visited that thread?
but were afraid to ask: 
STOP!! Never post your email address in open forums. Bots can "harvest" your email! If you must share your email use a Private Message or use the 
smilie in place of the real @
Pretty Please - add it to our Events forum(s) and add to the calendar! >> 
hello everyone I am a new member and a total luddite when it comes to computers so here is my question. I am in the process of replacing steering column bushings and rubber coupling. I have coupling off, no problem . steering wheel off ,tach and speedo removed I cant figure out how to get the column out, steering lock is out and I can slide column almost all the way out either towards cab or forward but something is stopping it. I am afraid to force anything . any help is greatly appreciated.
-
Hey Guest!
British Car Forum has been supporting enthusiasts for over 25 years by providing a great place to share our love for British cars. You can support our efforts by upgrading your membership for less than the dues of most car clubs. There are some perks with a member upgrade!**Upgrade Now**
(PS: Upgraded members don't see this banner, nor will you see the Google ads that appear on the site.)
TR6 steering column removal bushing replace
- Thread starter robert52
- Start date
Share this page
have several manuals but none specifically addressed my issue. However I got it out. it was hanging on the old bushings that were still in the housing. There is a fat spot on the steering shaft that will not allow it to pass thru with the bushing in place, all I have to do is reassemble with reverse procedure in mind. Thanks for the reply, great site, Im sure I will make good use of the info