• Hey Guest!
    British Car Forum has been supporting enthusiasts for over 25 years by providing a great place to share our love for British cars. You can support our efforts by upgrading your membership for less than the dues of most car clubs. There are some perks with a member upgrade!
    **Upgrade Now**
    (PS: Upgraded members don't see this banner, nor will you see the Google ads that appear on the site.)
Tips
Tips

Spitfire Steering Column Lock

Share this page

ActionJackson

ActionJackson

Freshman Member
Country flag
Offline
I've purchased a new Column lock with new key set, Original keys have been MIA for at least a decade. Anyway, I went to install the new switch today, Only to find out they are different. I've only seen one switch listing for everything FM60,006 and older, Mine is FM74000+. What needs to be done with the green wire that attached to the terminal on the old switch? Does this need to be grounded?
IngSwitch.jpg
 
Welcome to the Forum, AJ. On the TR6, the blade connection on the switch side powers a buzzer when the driver door is open & the key is in the ignition. I think it provides a ground but you could test by touching it to ground with the door open. It may be a feature you can do without. Hopefully a fellow Spitfire owner can weigh in.

Jeff
 
After further research looking at the wiring diagram, it appears that is what is is for.
Thanks for the help Tropic6!
 
Green is usually the color for a +12V supply when ignition is on... I wouldn't ground it. :eek:
 
Back
Top