• Hi Guest!
    You can help ensure that British Car Forum (BCF) continues to provide a great place to engage in the British car hobby! If you find BCF a beneficial community, please consider supporting our efforts with a subscription.
    There are some perks with a member upgrade!
    **Upgrade Now**
    (PS: Subscribers don't see this gawd-aweful banner
Tips
Tips

Steering Column Bushing

Share this page

B

Bill Young

Senior Member
Country flag
Offline
Healey Friends ..

Has anybody determined an easy method for installing the Felt Steering Column Bushing in the BJ8 steering column? I have the Moss part #867-600, and it is significantly thicker than the clearance space between the shaft and the shell.

Thanka

Bill Young
St. Johns Austin Healey Club
BJ8, BN2, AN5
 
Shave it down with a razor. Or better yet, use O rings. I used several an inch or so apart. Call British Car specialist in CA. They have the right size.
 
Thanks for the help Dale. I sliced the felt in half, in the flat, with a razor as suggested .. (not easy). and was able to install, however, there is still a small amount of play. I have reviewed O rings and I plan to order several, for this seems like the better solution.

Bill Young
BJ8, BN2, AN5
sjahc.com
 
Back
Top