• Hey Guest!
    British Car Forum has been supporting enthusiasts for over 25 years by providing a great place to share our love for British cars. You can support our efforts by upgrading your membership for less than the dues of most car clubs. There are some perks with a member upgrade!
    **Upgrade Now**
    (PS: Upgraded members don't see this banner, nor will you see the Google ads that appear on the site.)
Tips
Tips

stanchion repair , can it be done?

Share this page

timbn2

timbn2

Jedi Hopeful
Offline
i need to get this bee out of my bonnett! I seem to be fixated on my windscreen and its way to early in the resto for that, so lets get me re-oriented.

if part of a stanchion is broke or a threaded stud is missing/broke can these things be repaired. It looks cast to me so i kinda dont think there is a "filler" to use and then rechrome, but i could be wrong.
So can these be repaired, and what would the process be?
Thanks
tim
 
Yes Tim, They can be repaired by a specialist,However, the cost will most likely significantly exceed that of a good used replacement or new if available, where the damage is extensive.---Keoke- /ubbthreads/images/graemlins/hammer.gif
 
The USAF welds alum engine blocks so I guess all things are possible.
 
Jack, welding Aluminum heads and blocks is old hat now.Welding up the old cast Iron ones properly needs a real specialist.---Keoke- /ubbthreads/images/graemlins/yesnod.gif
 
what material are the stanchions made out of?

pics forthcoming...
 
Timbn2: I am not dead sure but I believe they are Aluminum.---Keoke-??
 
That was the point Keoke. Almost anything can be welded today with great results. Make sure the welder is certified.
 
[ QUOTE ]

Jack, welding Aluminum heads and blocks is old hat now.Welding up the old cast Iron ones properly needs a real specialist.---Keoke- /ubbthreads/images/graemlins/yesnod.gif

[/ QUOTE ]
A well equipped specialist; controlled pre & post heating cast iron is a must to avoid cracking.

Assuming we're talking about a windshield post, I'd think that could be repaired without too much trouble.

Now, I have some old Go-Kart magnesium wheels that I want to repair, and I will give it a go as soon as I talk myself into paying the HIGH price for magnesium filler rod (probably cost me $300-$400 for a couple pounds of rod).
 
Replace. Watch ebay. Ask Bill Bolton ot John Wilson both from the Oregon club.
 
Back
Top