• Hey Guest!
    British Car Forum has been supporting enthusiasts for over 25 years by providing a great place to share our love for British cars. You can support our efforts by upgrading your membership for less than the dues of most car clubs. There are some perks with a member upgrade!
    **Upgrade Now**
    (PS: Upgraded members don't see this banner, nor will you see the Google ads that appear on the site.)

Sprite Sway Bar

Share this page

Re: Sprite Sway Bar

My 949 has been bored to 998, heh.

I would expect that a 206 or a 295 is the way to go.

In addition Visard comments that these are the ones to replace your Bugeye stock head wit. Straight bolt on 6 Hp.
 
Re: Sprite Sway Bar

12G206 and 12G295s are the "open chamber heads" which are not much different than a full race prepared 948 head, though without the potential drawbacks like expense and unreliability normally associated with full race heads.
I would expect a lot more than 6 hp if you would also use the HS2 carbs insted of the original "HS1" carbs.
BTW, they bolt directly onto a stock 948 without overbore.
 
Re: Sprite Sway Bar

Oh yes, I have a set of HS2 carbs and intake and a 1297 exhaust manifold as well for when the time comes.

Gota breath you know. All three items should give about 12 HP bolt on. With a bit of head work even some more.
 
Back
Top