Hey - did you know if you click on the title of a thread it will take you to the first unread post since you last visited that thread?
but were afraid to ask: 
STOP!! Never post your email address in open forums. Bots can "harvest" your email! If you must share your email use a Private Message or use the 
smilie in place of the real @
Pretty Please - add it to our Events forum(s) and add to the calendar! >> 
VictorVictor
Freshman Member
Offline
My 65 sprite speedometer reads 0 when it is at rest but when driving it reads 10 miles/hour more than what the actual speed is. Any suggestions on how to calibrate it?
-
Hi Guest!
You can help ensure that British Car Forum (BCF) continues to provide a great place to engage in the British car hobby! If you find BCF a beneficial community, please consider supporting our efforts with a subscription.
There are some perks with a member upgrade!**Upgrade Now**
(PS: Subscribers don't see this gawd-aweful banner
sprite speedometer
- Thread starter VictorVictor
- Start date
Share this page
Trevor Jessie
Yoda
Offline
You can reposition the needle to get it close at the most common speed, but everything else will be off. Or, have a shop recalibrate for you, or have a shop make an adapter box.
Offline
My bugeye speedometer reads about 15% high as well, but the odometer is reasonably close to the correct value. So, before changing gears, you might want to check the odometer and if it's OK, the gearing is OK. There is probably a way to tweak the speedometer internals to get it closer, but I haven't dug into mine yet. Back in the 60s, most speedometers erred a few percent on the high side, so to some degree this isn't unexpected.
