Hey Guest!
Hey - did you know if you click on the title of a thread it will take you to the first unread post since you last visited that thread?
but were afraid to ask: 
STOP!! Never post your email address in open forums. Bots can "harvest" your email! If you must share your email use a Private Message or use the 
smilie in place of the real @
Pretty Please - add it to our Events forum(s) and add to the calendar! >> 
I recently bought a 1967 Sprite that had been in storage for about 20 years. Don’t know why it was taken off the road.
The 1098 engine runs pretty well, but there is a problem with the transmission. It will shift into 1st, 2nd, and reverse normally. However, when trying to engage 3rd or 4th there is no movement of the selector rod.
My question is, what can be done to investigate and possibly fix this issue without removing the engine and transmission?
The 1098 engine runs pretty well, but there is a problem with the transmission. It will shift into 1st, 2nd, and reverse normally. However, when trying to engage 3rd or 4th there is no movement of the selector rod.
My question is, what can be done to investigate and possibly fix this issue without removing the engine and transmission?
