• Hi Guest!
    You can help ensure that British Car Forum (BCF) continues to provide a great place to engage in the British car hobby! If you find BCF a beneficial community, please consider supporting our efforts with a subscription.
    There are some perks with a member upgrade!
    **Upgrade Now**
    (PS: Subscribers don't see this gawd-aweful banner
Tips
Tips

Sprite Heater Knob

Share this page

Baz

Baz

Yoda
Country flag
Offline
I remember a long while back, a thread on where to find these rare beasts. Searched, but no luck.
A friend who will be driving with me to the Ozarks is nearly done with his tweaks and upgrades, all he needs is the heater knob with the H on it.
If anyone knows a source, I'd (and he'd) appreciate it greatly.
 
I can't help you...heck, I'm repainting the "H" on mine!
 
The heater knob in the Ugly Bug has a "W" on it. :wink:
 
Trevor Jessie said:
The heater knob in the Ugly Bug has a "W" on it. :wink:
Click to expand...

cause it only gets warm? - not hot?
 
H knob is from VB as I remember.

It is the Choke assembly with knob that is impossable unless you find an old stock as I did.
 
"Warm"! that's great JP. I was wondering what I could claim it stood for. My heater knob was busted and I had an extra wiper knob so the choice was easy for me.
 
Barry

I purchased several things from Ashley Hinton. I've been very satisfied with everything except his fresh air intake duct. His knobs are supposedly made from the original tooling.
 
I don't recall the lettering as being that large... but it's been a while since I've seen an OEM one.
 
DrEntropy said:
I don't recall the lettering as being that large... but it's been a while since I've seen an OEM one.
Click to expand...

The Doctor is right even with the entropy :wink:

Pat
 
...I have short moments of lucidity yet... :smirk:
 
Hey! there are not too many young guys driving sprites (Drew being an exception) so maybe the letter is intentionally larger. :smile:
 
Looks like a correct knob to me.
 
Looks like my original one that needs painting....all my original knobs are large..the new starter cable I bought has a smaller "S" on it than the original.
 
DrEntropy said:
I don't recall the lettering as being that large... but it's been a while since I've seen an OEM one.
Click to expand...

Same knobs but smaller letters on a Morris Minor.
 
Main reason I went thru the drill of tapping out the old style cable end and running a die over the shaft of a "new" choke cable was the obvious mismatch of the "C" letter... but it's for the MGB.
 

Attachments

  • 11435.jpg
    11435.jpg
    22 KB · Views: 144
Sprite Heater Knob / now the switch....

Thanks to you chaps, he has an 'H' knob, he's also found a source for the switch / cable but wants to know what length, as there are different lengths available apparently.
If anyone can measure, or whatever, the length needed for a '65 Mk III Sprite, it would be appreciated.
Cheers guys, you're the best!
 
Back
Top