Hey Guest!
Hey - did you know if you click on the title of a thread it will take you to the first unread post since you last visited that thread?
but were afraid to ask: 
STOP!! Never post your email address in open forums. Bots can "harvest" your email! If you must share your email use a Private Message or use the 
smilie in place of the real @
Pretty Please - add it to our Events forum(s) and add to the calendar! >> 
microfox
Freshman Member
Offline
Is there such a thing?
I am trying to raise the passenger (right) side by 1.5" to counter a sag there.
I have swapped springs, replaced with new ones and measured as much as
I could. The springs I got from Moss Motors is 11.5" high by 5" diameter
(coils are 1/2"). I need either a 13" tall spring, or some kind of spacers to
build height. I hope I don't have to machine some.
I am trying to raise the passenger (right) side by 1.5" to counter a sag there.
I have swapped springs, replaced with new ones and measured as much as
I could. The springs I got from Moss Motors is 11.5" high by 5" diameter
(coils are 1/2"). I need either a 13" tall spring, or some kind of spacers to
build height. I hope I don't have to machine some.