• Hi Guest!
    If you appreciate British Car Forum and our 25 years of supporting British car enthusiasts with technical and anicdotal information, collected from our thousands of great members, please support us with a low-cost subscription. You can become a supporting member for less than the dues of most car clubs.
    There are some perks with a member upgrade!
    **Upgrade Now**
    (PS: Subscribers don't see this gawd-aweful banner
Tips
Tips

Spring Compressor

Share this page

DNK

DNK

Great Pumpkin
Country flag
Offline
VALVE SPRING, Ok this was discussed a little while ago and was mentioned a how to do it with the head on the car.

Re kindle the memory
 
Stuff rope into the cylinder, turn crank to raise piston and it holds the valve up.
 
Cam/crank set to TDC firing on each hole you need to do this with, too.
 
DrEntropy said:
Cam/crank set to TDC firing on each hole you need to do this with, too.
Click to expand...
Well if you're going to get all technical and particular... :crazyeyes:
 
DrEntropy said:
Cam/crank set to TDC firing on each hole you need to do this with, too.
Click to expand...

Doc sounds like <span style="font-style: italic">Yoda</span> ....
 
What kinda job you got goin Don ?
And btw the triple TBI hasn't got going yet. Last I heard Greg was waiting on something from RG.
 
remove the rocker arms. bring the piston of the cylnder you are working on up to TDC. Piston will hold the valve in place enough to remove spring. No need for rope and a chance of bending something.
 
Here is a suggestion by a gent dowwn under.
And it worked for the owner of the broken spring car

"Place a ring spanner on the valve collar and compress the valve spring by pushing down on the spanner; get an assistant to drop the cotters between the collar and the valve stem."
 
Back
Top