• Hey Guest!
    British Car Forum has been supporting enthusiasts for over 25 years by providing a great place to share our love for British cars. You can support our efforts by upgrading your membership for less than the dues of most car clubs. There are some perks with a member upgrade!
    **Upgrade Now**
    (PS: Upgraded members don't see this banner, nor will you see the Google ads that appear on the site.)
Tips
Tips

spridget tranny questions

Share this page

S

Stan Swanson

Freshman Member
Offline
Hello all,

I need some advice on spridget transmissions. I am planning to install the internals from a spridget CR box into an Austin A-30 case. goal is to approximate the modifications of a period Lotus Eleven gear box using the spridget internals. My first question is what sprite box I need to aquire (date, engine size, serial number, or other identifier). I found a reference for determining a CR box by the chassis plate, is there any way to identify a CR box other than this, especially from the case itself? Do I count revs on the input/output shafts (and is there one gear that would be the best indicator of the Close-ratio gear set)? Any cautions on terminal problems with used spridget boxes? What are the gear ratios for a factory CR box. what else do I need to know? Box will be mated to a Coventrty Climax motor with planned 90-100 HP. feel free to e-mail me directly at mhkites@worldnet.att.net
 
<blockquote><font size="1" face="Verdana, Arial">quote:</font><hr>Originally posted by Stan Swanson:
Hello all,

Do I count revs on the input/output shafts (and is there one gear that would be the best indicator of the Close-ratio gear set)? Any cautions on terminal problems with used spridget boxes? What are the gear ratios for a factory CR box.<hr></blockquote>

Stan, I found references to 3 Sprite gearsets, 2 of which were called close-ratio. The early, non-CR boxes had a 3.63 first gear,2.37 second, and 1.41 third. I think the Lotus CR had about a 2.5 first.

The Mk II and later Sprites had a 3.2 first, 1.91 second, and 1.36 third (Not sure about third but 1.36 is close)

The other Sprite CR box is probably rarer than original Lotus gears & had a 3.0 first.

I'd use first gear as a quick test - count the revs in and out. It appears to me that you'll have a harder time finding a wide-ratio box than a CR one.

Maybe one of the Sprite wizards can tell you how to recognize the boxes, & whether there are better ratio options. I expect all of these would be real "stump pullers" in an Eleven.

(We had an Eleven years ago - #324 - but iirc it had a TC transmission)

Good luck
 
Back
Top