• Hi Guest!
    You can help ensure that British Car Forum (BCF) continues to provide a great place to engage in the British car hobby! If you find BCF a beneficial community, please consider supporting our efforts with a subscription.
    There are some perks with a member upgrade!
    **Upgrade Now**
    (PS: Subscribers don't see this gawd-aweful banner
Tips
Tips

Spridget forum

Share this page

You found it, welcome.
What is it, Sprite or Midget?
Project or a runner…?
Enquiring minds want to know,
Pat
 
here it is - welcome!
 
Welcome. Glad you found it. Now let us know what you have and what you are doing please.
 
IMG_0503.jpeg
IMG_0505.jpeg
Me and my Sprite
 
Long story short, my Sprite started running rough on the way back from a drive. Got worse as we made it home. At this point I have removed the oil pan as whilst reinstalling the distributor drive gear at 10% BTDC, it fell into the oil pan. That turned out to be a good thing. The pan was not sealed properly. After I get it back in I will move on to static timing. Then move forward without problems hopefully.

Thanks for responding and I will keep this thread updated.

BR,

Rhett
 
More on the trouble. Before I removed the distributor I tried adjusting it as it seemed to be a timing issue. I couldn’t get the engine running properly. This is when I decided to remove the distributor and gear and reinstall at 10 BTDC. I bought a new/ used distributor in great condition so I should be good. FYI, I have a Crane CR700 ignition system. This has been a rolling restoration. The engine has @3500 miles on it. I would like to ask if anyone has encountered the same or similar problem. The drive gear is in near perfect condition and everything looks good underneath. Any advice is greatly appreciated.
 
rspargu2 said:
More on the trouble. Before I removed the distributor I tried adjusting it as it seemed to be a timing issue. I couldn’t get the engine running properly. This is when I decided to remove the distributor and gear and reinstall at 10 BTDC. I bought a new/ used distributor in great condition so I should be good. FYI, I have a Crane CR700 ignition system. This has been a rolling restoration. The engine has @3500 miles on it. I would like to ask if anyone has encountered the same or similar problem. The drive gear is in near perfect condition and everything looks good underneath. Any advice is greatly appreciated.
Click to expand...
Is the condenser good? Points adjusted?
 
Have you looked in the float bowls for fuel line 'crud'? If your fuel filler cap isn't vented it could cause issues as well.
 
Back
Top