• Hi Guest!
    You can help ensure that British Car Forum (BCF) continues to provide a great place to engage in the British car hobby! If you find BCF a beneficial community, please consider supporting our efforts with a subscription.
    There are some perks with a member upgrade!
    **Upgrade Now**
    (PS: Subscribers don't see this gawd-aweful banner
Tips
Tips

Splined Hub Tool

Share this page

jhva

jhva

Freshman Member
Offline
Hi,

Someone probably sells a tool for removing the 1 5/16 axle nut inside the splined hub but I made one relatively easy. Took .050 off a Proto 1 5/16 deep well 1/2" drive socket and works great with the air impact wrench. Finding that you have to make a lot of tools when working on an old car. :smile:

john
 
:lol:

Now it's called a "Cow Tool"!!! :jester:

MacGyver any tool for a specific purpose. One drawer of my box is full of nothing BUT specific purpose thingies. Some are "Genuine Factory" ones, others are bent/ground/cut for the job they do.

Well done John! :thumbsup:
 
Just go to Craftsman & order one - it fits.
 
an air wrench?
 
Yep, 1-15/16" 3/4 drive Craftsman socket with a 1/2" adapter on my 1/2" air impact driver.....takes 'em off; puts 'em on.....didn't have to do anything to the outside dimensions of the socket.
 
Back
Top