• Hey Guest!
    British Car Forum has been supporting enthusiasts for over 25 years by providing a great place to share our love for British cars. You can support our efforts by upgrading your membership for less than the dues of most car clubs. There are some perks with a member upgrade!
    **Upgrade Now**
    (PS: Upgraded members don't see this banner, nor will you see the Google ads that appear on the site.)
Tips
Tips

Splined hub set

Share this page

hondo402000

hondo402000

Darth Vader
Offline
well I purchased a new splined hub set RFK1457 with the 2 eared knock offs, the set on my car are in good shape just a little rust, so I have a used set to sell, they have the octagon nuts, so if any one is interested send me a PM, so far fits TR4,4A, TR250 and TR6, 4 splines, 4 octagon nuts, wrench, and 16 wheel nuts

Hondo
 
Geo Hahn said:
FWIW -- also fits the late TR3s & all TR3As.
Click to expand...
...and can be used to "upgrade" even the earliest TR2 to wire wheels or, with the right hubs, to replace unavailable worn original wire wheel hubs on the earlier "Lockheed" TRs.

They probably would fit the Stag and the 2000/2.5/2500 sedan range as well.
 
Though truth be told, I never cared for the 'safety' octagon knock-offs, guess it was because I remember rooting for Messala in that chariot race all those years ago...

3.jpg
 
Andrew Mace said:
unavailable worn original wire wheel hubs on the earlier "Lockheed" TRs.
Click to expand...
Are they unavailable? TRF had the fronts listed just a few days ago, although I didn't check the rears.
<div class="ubbcode-block"><div class="ubbcode-header">Quote:]They probably would fit the Stag and the 2000/2.5/2500 sedan range as well. [/QUOTE]
Yup, and the Stags at least had the safety knockoffs as original.

QuarterviewUSMkIStagRobertKrantz.jpg
 
Back
Top