• Hey Guest!
    British Car Forum has been supporting enthusiasts for over 25 years by providing a great place to share our love for British cars. You can support our efforts by upgrading your membership for less than the dues of most car clubs. There are some perks with a member upgrade!
    **Upgrade Now**
    (PS: Upgraded members don't see this banner, nor will you see the Google ads that appear on the site.)

Spitfire Spitfire top install mk1 or mk2

Share this page

T

tomgt6

Jedi Warrior
Offline
I just got a new top for a mk1/mk2 spitfire and I see that the top doesn't have any of the snaps installed and not sure if there is any special to installing the top for a mk1. Does anyone have any step by step instructions or has taken pictures.

I have the old top but I am not sure I always had the elastic strap installed correctly. Any help would be great. Thanks.
 
Hopefully you have the various front and rear metal reinforcement bars; they're the most critical part to making the top fit. There are only a few snaps around the rear tonneau area; just start closest to center and work your way out, alternating between sides.

I can't help at the moment with the elastic strap, but a copy of the Owner's Handbook will show step-by-step how the top is erected, including that strap.
 
I do have the old top. But the advice you talk about helps. I don't have an owners manual so that is why I am not sure about the inside setup. Thanks again.
 
Back
Top