-
Hi Guest!
If you appreciate British Car Forum and our 25 years of supporting British car enthusiasts with technical and anicdotal information, collected from our thousands of great members, please support us with a low-cost subscription. You can become a supporting member for less than the dues of most car clubs.
There are some perks with a member upgrade!**Upgrade Now**
(PS: Subscribers don't see this gawd-aweful banner
Hey - did you know if you click on the title of a thread it will take you to the first unread post since you last visited that thread?
but were afraid to ask: 
STOP!! Never post your email address in open forums. Bots can "harvest" your email! If you must share your email use a Private Message or use the 
smilie in place of the real @
Pretty Please - add it to our Events forum(s) and add to the calendar! >> 
Spitfire spitfire front suspension
- Thread starter philman
- Start date
Share this page
Offline
How early is the Herald? Pre-June 1962 (or thereabouts), i.e. pre-GA80001, not a great idea, mostly because the earlier chassis isn't capable of the torque of the bigger engines (1296 or 1493). GA80001 and later or GB series should be fine for any engine.
Gearboxes are another story. The only thing that won't work in the early chassis is an OD gearbox.
Disc brakes were an option beginning with the 1200 series, and that's pretty much bolt-in. This shows you how the early kits worked. But you can simply take everything between the upper and lower a-arms and swap them into a Herald. (Do use the proper connecting pipe and flexible hose, and it's really best to find either the taller solid-body brake master or find one of the plastic reservoir extensions for the extra fluid capacity needed. Or do the extra plumbing to adapt a dual-master cylinder if you like.
Gearboxes are another story. The only thing that won't work in the early chassis is an OD gearbox.
Disc brakes were an option beginning with the 1200 series, and that's pretty much bolt-in. This shows you how the early kits worked. But you can simply take everything between the upper and lower a-arms and swap them into a Herald. (Do use the proper connecting pipe and flexible hose, and it's really best to find either the taller solid-body brake master or find one of the plastic reservoir extensions for the extra fluid capacity needed. Or do the extra plumbing to adapt a dual-master cylinder if you like.