Hi Guest!
Hey - did you know if you click on the title of a thread it will take you to the first unread post since you last visited that thread?
but were afraid to ask: 
STOP!! Never post your email address in open forums. Bots can "harvest" your email! If you must share your email use a Private Message or use the 
smilie in place of the real @
Pretty Please - add it to our Events forum(s) and add to the calendar! >> 
John Kuzman
Jedi Trainee
Offline
Greetings!
I had to replace the front cover on a later model 1500 Spitfire gearbox bellhousing. Since I had the bellhousing separated from the gearbox, I decided to replace the oil seal that is pressed into the bellhousing front cover. Now when I tighten the five bellhousing bolts, the new oil seal bears down on the gearbox input shaft circlip and I can barely turn the input shaft. Tried another seal with the same result. What am I missing? Thanks.
John
I had to replace the front cover on a later model 1500 Spitfire gearbox bellhousing. Since I had the bellhousing separated from the gearbox, I decided to replace the oil seal that is pressed into the bellhousing front cover. Now when I tighten the five bellhousing bolts, the new oil seal bears down on the gearbox input shaft circlip and I can barely turn the input shaft. Tried another seal with the same result. What am I missing? Thanks.
John