• Hi Guest!
    You can help ensure that British Car Forum (BCF) continues to provide a great place to engage in the British car hobby! If you find BCF a beneficial community, please consider supporting our efforts with a subscription.
    There are some perks with a member upgrade!
    **Upgrade Now**
    (PS: Subscribers don't see this gawd-aweful banner
Tips
Tips

TR2/3/3A Speedy Sleeve Repair Sleeves for Rear Axle Pinion and Half Shafts

Share this page

M

mastaphixa

Jedi Trainee
Country flag
Offline
I'm looking for the part number for the speedy sleeves for the rear axle pinion and half shafts. I've seen the sleeves referenced here but not the part numbers.
Thank you,
Steve Baker
 
Hi,

Moss shows a listing for the pinion. I replaced my pinion seal and inner axles seal on my 1960 TR-3a. The inner seals were leather, I assume original. They just polish the surface, and did not dig a groove in it. I had the speedy sleeves for it, but I did not have anything to slide over the axle to install them.

Good Luck.

Roy
 
Back
Top