• Hi Guest!
    If you appreciate British Car Forum and our 25 years of supporting British car enthusiasts with technical and anicdotal information, collected from our thousands of great members, please support us with a low-cost subscription. You can become a supporting member for less than the dues of most car clubs.
    There are some perks with a member upgrade!
    **Upgrade Now**
    (PS: Subscribers don't see this gawd-aweful banner
Tips
Tips

TR2/3/3A Speedy Sleeve Repair Sleeves for Rear Axle Pinion and Half Shafts

Share this page

M

mastaphixa

Jedi Trainee
Country flag
Offline
I'm looking for the part number for the speedy sleeves for the rear axle pinion and half shafts. I've seen the sleeves referenced here but not the part numbers.
Thank you,
Steve Baker
 
Hi,

Moss shows a listing for the pinion. I replaced my pinion seal and inner axles seal on my 1960 TR-3a. The inner seals were leather, I assume original. They just polish the surface, and did not dig a groove in it. I had the speedy sleeves for it, but I did not have anything to slide over the axle to install them.

Good Luck.

Roy
 
Back
Top