• Hey Guest!
    British Car Forum has been supporting enthusiasts for over 25 years by providing a great place to share our love for British cars. You can support our efforts by upgrading your membership for less than the dues of most car clubs. There are some perks with a member upgrade!
    **Upgrade Now**
    (PS: Upgraded members don't see this banner, nor will you see the Google ads that appear on the site.)

TR2/3/3A Speedo and Tach installation. 61 TR3

Share this page

Tinkerman

Tinkerman

Darth Vader
Offline
Mornin Folks. I'm ready to install the speedometer and the tachometer. Question though, looks like it might be smart for me to hook up the cables now and then put the units in. Appreciate any thoughts or comments.

Thanks, Tinkerman
 
Hey Tinkerman,

If you are referring to the drive cables, they are pretty accessible anytime. You may get a better view if you do the cables first, though.

John
 
Might be marginally easier that way; it can be a bit difficult to get the cable nut started on the back of the instrument with it already installed in the dash.

But be sure to install the rubber grommets first, if your cables didn't come with them already installed. They have to go over the small instrument end of the cable.
 
Randall, if your talking about firewall grommets, yep they are on. Good point though. So many things to think about!

Thanks, Dick
 
Back
Top