• Hey Guest!
    British Car Forum has been supporting enthusiasts for over 25 years by providing a great place to share our love for British cars. You can support our efforts by upgrading your membership for less than the dues of most car clubs. There are some perks with a member upgrade!
    **Upgrade Now**
    (PS: Upgraded members don't see this banner, nor will you see the Google ads that appear on the site.)

TR6 Speed Bleeders for 1975 TR6

Share this page

A

alansimon

Member
Offline
Hi,

Does anyone know what the brake bleeder thread sizes are for the front and back of a 1975 TR6? The front caliper is the newer type with metric pipe threads, but I do not know if the bleeder valve is also metric.

Thank you.

Alan
 
Aloha Alan,

I just ordered some from them for my TR3. I've installed the one on the clutch slave cylinder and it was simple to bleed the air out of the line by myself. For what it's worth, the TR3 thread size is 3/8 x 24 TPI. I went to their web site:

https://speedbleeder.zoovy.com/

and asked them what size I needed. I told them the model car I had and which brake manufacturer was installed and received a prompt reply. I sure they know what you need.

In addition to the speedbleeder, I also ordered the tubing and collection bag they offer as an accessory. It is like a IV bag, solves the mess problem and you can't knock it over like a small jar.

Safety Fast,
Dave
 
Back
Top