• Hi Guest!
    You can help ensure that British Car Forum (BCF) continues to provide a great place to engage in the British car hobby! If you find BCF a beneficial community, please consider supporting our efforts with a subscription.
    There are some perks with a member upgrade!
    **Upgrade Now**
    (PS: Subscribers don't see this gawd-aweful banner
Tips
Tips

Speed bleeder part numbers?

Share this page

T

tdskip

Yoda
Country flag
Offline
Since I'm asking, how about for the clutch slave, fronts, Toyota calipers for those who have done the conversion (SB1010?), and rears?

Thanks!
 
DNK said:
Tom, Is the 6 drivable?
Click to expand...

It was until the clutch MC went out - working through bleeding it now.

Trying to make a pressure bleeder just like I made for the brakes. Just waiting for the sealer to dry and then I'm going to give it a go :smile:
 
Pull out the bleeder and measure it. All the info is on their website to cross reference
 
Info on clutch slave I've seen is that its 7/16-20, rears would be 3/8-24. Been meaning to buy some to try them out but as yet haven't bit the bullet.
 
Autozone, O'Rieleys and Pep Boys don't seem to have them. Anyone down here find them locally?

Going to give this a try....

DSCN4745.jpg
 
Napa has them, they call them something else. They're sold under their brand. For them you need to get into speed bleeders cat. and find another big name car with that size and go to NAPA and they will look in their cat. to see if it is the same . I outfitted the Wedge completely that way
 
If it's 7/16 X 20 then its a 71620 speed bleeder #
Go to NAPA and ask for

F150 Front Disk 80 - 96
 
OK - once again taking advantage of my, um, redundance in projects.

TR6 clutch slave bleeder - 7/16 20
Toyota calipers - M10 1.00 pitch
TR6 & TR4a rear cylinder - 3/8 24

And for those of you who happen to be also working on, say, oh I don't know, an MGC those are 3/8 24 as well.
 
Gees Tom, I don't have the part #'S FOR NAPA.
I'm pretty sure the stock bleeders for the brakes are 3/8'sX 24.
They have 3 different sizes for that (Speedbleeder Does) depending on length you want
 
NAPA #675-1567, 2 per package. Call first if the parts store isn't local, since they we're anywhere to be found. Carquest, Autozone may the stock 5/16 ones in stick but it's better in my opinion to just order the darn things directly from Speed Bleeder directly and avoid the hassle. (Sorry, a little feed up ounter service right now).
 
Back
Top