Hi Guest!
Hey - did you know if you click on the title of a thread it will take you to the first unread post since you last visited that thread?
but were afraid to ask: 
STOP!! Never post your email address in open forums. Bots can "harvest" your email! If you must share your email use a Private Message or use the 
smilie in place of the real @
Pretty Please - add it to our Events forum(s) and add to the calendar! >> 
I am in the process of starting back on the restoration of a BJ8 I have owned since 1988. It has had all the panel work done on top of a new Chassis from Kilmartins in Australia. I now live in Sydney.
Kilmartins chassis has the adjustable suspension towers for the fronts and I purchased the Koni Shocks when I ordered the chassis.
I'm looking about at sensible modifications ( there's plenty to choose from) and the Rear Tube suspensions suggest themselves. My Armstrong's would have to be rebuilt in any case
I would like to know if anyone has a drawing of the fixing set up - the Kit of parts I can see on the SC Parts site looks very small so I am a bit concerned about load distribution. I did see the Steve Gerow and Red57 threads in the forum from 2018.
Is there more recent experiences with the Spax mod? Are there drawings or photo's of the current kit in use?
I have written to SC Parts asking if they have drawings or instructions.
Kilmartins chassis has the adjustable suspension towers for the fronts and I purchased the Koni Shocks when I ordered the chassis.
I'm looking about at sensible modifications ( there's plenty to choose from) and the Rear Tube suspensions suggest themselves. My Armstrong's would have to be rebuilt in any case
I would like to know if anyone has a drawing of the fixing set up - the Kit of parts I can see on the SC Parts site looks very small so I am a bit concerned about load distribution. I did see the Steve Gerow and Red57 threads in the forum from 2018.
Is there more recent experiences with the Spax mod? Are there drawings or photo's of the current kit in use?
I have written to SC Parts asking if they have drawings or instructions.