• Hi Guest!
    You can help ensure that British Car Forum (BCF) continues to provide a great place to engage in the British car hobby! If you find BCF a beneficial community, please consider supporting our efforts with a subscription.
    There are some perks with a member upgrade!
    **Upgrade Now**
    (PS: Subscribers don't see this gawd-aweful banner
Tips
Tips

smith guage lights

Share this page

T

Tyrone

Freshman Member
Offline
Hi, I don't seem to be able to unscrew the original instrument bulbs. They're set deep into the socket and hard to get a grasp on.(surrounded by those fingers) I'd prefer not to destroy them. Does anybody have an idea as to their removal? Thanks, Tyrone BJ8
 
If the wire going into the back of the socket seems well-attached, pull it gently to compress the coil spring inside, relieving the pressure on the bulb.Bob
 
Unfortunately my method entails destroying the bulb. But sometimes ya gotta do what ya gotta do. With the bulb broken and the power turned off, I have grabbed the edge of the brass base with needle nose pliers to rotate the threaded base. But also if the socket is this badly stuck, it may be necessary to just replace the socket.
 
Back
Top