• Hey Guest!
    British Car Forum has been supporting enthusiasts for over 25 years by providing a great place to share our love for British cars. You can support our efforts by upgrading your membership for less than the dues of most car clubs. There are some perks with a member upgrade!
    **Upgrade Now**
    (PS: Upgraded members don't see this banner, nor will you see the Google ads that appear on the site.)

slave cylinder resleeve or buy new

Share this page

T

tomnanney

Jedi Hopeful
Offline
The clutch slave cylinder on my BJ 8 has gone out. It's been rebuilt several times through the years and I am wondering if it's time to have it sleeved or to just buy a new one. Are the ones from Moss or other suppliers worth buying? Any suggestions are appreciated.
 
tomnanney said:
The clutch slave cylinder on my BJ 8 has gone out. It's been rebuilt several times through the years and I am wondering if it's time to have it sleeved

Good Idea and double stepped machined by Billy @ White Post Restorations---Keoke


or to just buy a new one. Are the ones from Moss or other suppliers worth buying?

Well IMOP: Wont stand up to a properly rebuilt one

Any suggestions are appreciated.
Click to expand...


--------------------------------------- :driving:
 
I had Apple Hydraulics in New York rebuild my two master cylinders with sleeves installed. The cost was significantly lower than White Post and they are holding up just fine.
 
Back
Top