Hey - did you know if you click on the title of a thread it will take you to the first unread post since you last visited that thread?
but were afraid to ask: 
STOP!! Never post your email address in open forums. Bots can "harvest" your email! If you must share your email use a Private Message or use the 
smilie in place of the real @
Pretty Please - add it to our Events forum(s) and add to the calendar! >> 
A friend of mine is planning to put 6 inch steel rims on his Mk2 and was asking about tyre sizes (thinking I had had wider rims on my car). He wants a lower profile as he has overdrive and a 3.59? diff. So my question is has anyone any experience of wider tyres on a Mk2? How wide and low can you go?
-
Hi Guest!
You can help ensure that British Car Forum (BCF) continues to provide a great place to engage in the British car hobby! If you find BCF a beneficial community, please consider supporting our efforts with a subscription.
There are some perks with a member upgrade!**Upgrade Now**
(PS: Subscribers don't see this gawd-aweful banner
Six inch rims on a Mk2?
- Thread starter Jack64nm
- Start date
Share this page
D
Deleted member 8987
Guest
Guest
Offline
5.5 is about it.
Modify the spats and you can go biger, but make sure you clear everything on the back side (caliper lines, ball joints, tie rod ends, that silly stuff).
I read up on it once, can't recall what you need to do.
Suffice it to say, my MK2 was making a funny rattle in the LF, found one of the caliper connector lines was just not quite flush against the caliper body and hitting the center section.
Modify the spats and you can go biger, but make sure you clear everything on the back side (caliper lines, ball joints, tie rod ends, that silly stuff).
I read up on it once, can't recall what you need to do.
Suffice it to say, my MK2 was making a funny rattle in the LF, found one of the caliper connector lines was just not quite flush against the caliper body and hitting the center section.
