• Hi Guest!
    You can help ensure that British Car Forum (BCF) continues to provide a great place to engage in the British car hobby! If you find BCF a beneficial community, please consider supporting our efforts with a subscription.
    There are some perks with a member upgrade!
    **Upgrade Now**
    (PS: Subscribers don't see this gawd-aweful banner
Tips
Tips

Simpe Simon Scroll Saw

Share this page

JPSmit

JPSmit

Moderator
Staff member
Silver
Country flag
Offline
Yup scroll saw alliteration. :D. A couple of years ago I picked up this saw off our local freecycle and am fixing it up for my daughter. Not the actual saw b ut it looks like thie:

1644782032623.png


It seems to have been made in the 40's and early 50's for Canadian Department Stores and, apparantly Government Surplus in the USA

progress-is-fine.blogspot.com

We used to make things in this country. #255: "Simple Simon" Power Tools (Wilson Brass & Aluminum Foundries, Toronto, Ontario)

progress-is-fine.blogspot.com progress-is-fine.blogspot.com

The saw itself has an oil bath lubrication system for the guts of the saw - any suggestions what to use for oil? I was thinking Singer 3 in 1 but, could I use Marvel Mystery oil or use up some ATF or Fork oil?

thoughts anyone?
 
I would us a 20W oil, any brand and non synthetic. (y)
 
PAUL161 said:
I would us a 20W oil, any brand and non synthetic. (y)
Click to expand...
Thanks Paul! funny you should post, this is from last February and I literally pulled out the saw today to try and make it go. I actually poured gear oil in because I had some. I think I need a better belt and maybe a stronger motor (It has a sewing maching motor and a rubber 'O ring' type belt) - it turns but reluctantly and it doesn't especially cut.
 
The 3 in 1 makes a 20w for furnace pumps.
 
Back
Top