• Hi Guest!
    If you appreciate British Car Forum and our 25 years of supporting British car enthusiasts with technical and anicdotal information, collected from our thousands of great members, please support us with a low-cost subscription. You can become a supporting member for less than the dues of most car clubs.
    There are some perks with a member upgrade!
    **Upgrade Now**
    (PS: Subscribers don't see this gawd-aweful banner
Tips
Tips

signature

Share this page

T

Tom Bedenbaugh

Jedi Hopeful
Offline
Guys I'm trying to put pic in there. I can't figure out how to keep them small.
hammer.gif
crazy.gif
thirsty.gif
confused.gif
mad.gif
blush.gif


[ 08-09-2003: Message edited by: Tom Bedenbaugh ]

[ 08-09-2003: Message edited by: Tom Bedenbaugh ]</p>
 
you need to use the properties of the thumbnail on Tony's site, not the fullsize pic. you can't make it any smaller than it is on the site it is located on
 
Thanks ,Steve. I kind of went over board on this one. I really like the knock off Mini Lites. I have a lot of trouble with binched inter tubes on the wires. After the third one I deposited them in the round file and ordered the Mini Lites. I also went with the leather kit from VB. I chose the black with red piping. It is real sharp with the yellow. Another thin I did. Instead of bondoing the front end damage I replaced the whole front cap. I even went with the OEM aluminum hood. She took first in class at the 96 MGB convention. That made my hat size go up a couple of sizes.
 
I can well imagine!! Congratulations, especially on going about the repairs the right way. If a job is worth doing, it is worth doing well.

I'm considering new wheels and a fabric hood for my 'B'. Not original, but at least the wheels could be considered as period modifications.
driving.gif
 
Now I know where everyones been at mgbexperience! This is a neat site. I've got to take the time to check out the features.
cheers.gif
 
I don't have a problem with mods done that can always be reversed. I can tell you one thing about the ML wheels. They make a HUGE difference in the ride. They are smooth as glass, and have absolutely no flex. I have two other cars with Rostyle wheels and they don't hold the road like the ML. The cloth tops are sharp, but real $$$. The reason I didn't go that rough is I have had customer who installed them, and they didn't last any longer than the vinyl.

[ 08-09-2003: Message edited by: Tom Bedenbaugh ]</p>
 
I think I got it right this time. You puter savy guys have no idea how had that was for this computer stupid guy. It took me with help from my friends Chuck&Tony almost an 3 hour to figure it out. Don't laugh, I'm lucky I figured it out at all.
thumbsup.gif
thirsty.gif
cheers.gif
lol.gif
computer.gif
hammer.gif


[ 08-09-2003: Message edited by: Tom Bedenbaugh ]</p>
 
Just testing My signature....

[ 08-09-2003: Message edited by: Dwain ]</p>
 
Dwain...hey, man...

Tom...sig looks great

chuck...whadda ya mean "try to"...BE THERE!
 
Back
Top