Hey - did you know if you click on the title of a thread it will take you to the first unread post since you last visited that thread?
but were afraid to ask: 
STOP!! Never post your email address in open forums. Bots can "harvest" your email! If you must share your email use a Private Message or use the 
smilie in place of the real @
Pretty Please - add it to our Events forum(s) and add to the calendar! >> 
TRclassic3
Jedi Trainee
Offline
Can anyone suggest a source for the stationary side curtain window. dzus type
-
Hey Guest!
British Car Forum has been supporting enthusiasts for over 25 years by providing a great place to share our love for British cars. You can support our efforts by upgrading your membership for less than the dues of most car clubs. There are some perks with a member upgrade!**Upgrade Now**
(PS: Upgraded members don't see this banner, nor will you see the Google ads that appear on the site.)
Side curtain window
- Thread starter TRclassic3
- Start date
Share this page
Offline
I got one from TRF last year and a local upholstery shop installed it for me. (Just the thin plastic insert)
Marvin Gruber
Yoda
Offline
I have frames if you need them
Marv
Marv
Lou Metelko
Jedi Trainee
Offline
John:
VTR's own Bill Lynn has done a great job of registering all TR2s worldwide as well as writing a very detailed originality guide for the TR2. All at www.vtr.org/TR2/index.shtml
Lou Metelko
Auburn, Indiana
54 TR2LD TS981L
VTR's own Bill Lynn has done a great job of registering all TR2s worldwide as well as writing a very detailed originality guide for the TR2. All at www.vtr.org/TR2/index.shtml
Lou Metelko
Auburn, Indiana
54 TR2LD TS981L
TR3TR6
Jedi Warrior
Offline
Ed:
I just purchased new ones from TRF and installed them myself. They will require some trimming. I used my old ones as a pattern. I have the two part windows with one sliding open. The stationary one can be trimmed using a box cutter. The metal part with the seal attached I used my dremel tool to cut off. The sliding window is much thicker and I used my dremel tool with the cut-off wheel to trim it. I then used a file to smooth the edges. I glued the stationary window to the vinyl on the front edge of the window using a clear drying glue.
I just purchased new ones from TRF and installed them myself. They will require some trimming. I used my old ones as a pattern. I have the two part windows with one sliding open. The stationary one can be trimmed using a box cutter. The metal part with the seal attached I used my dremel tool to cut off. The sliding window is much thicker and I used my dremel tool with the cut-off wheel to trim it. I then used a file to smooth the edges. I glued the stationary window to the vinyl on the front edge of the window using a clear drying glue.
Attachments
Last edited:
OP
TRclassic3
Jedi Trainee
Offline
Thanks to all for the responses. I had looked for them on TRF and only found a listing refencing the wedge type. Took another look and found them listed. Not sure what I missed the first time.
Terry, when you installed yours was this done with the side curtain other wise intact or were you doing a complete rebuild?
Terry, when you installed yours was this done with the side curtain other wise intact or were you doing a complete rebuild?
TR3TR6
Jedi Warrior
Offline
Ed, this was done with the side curtain intact. But the windows in mine were home made by a previous owner; who used a thicker plastic for all the windows. The hardest part was removing the old ones since they were brittle and didn't want to bend. They were badly scratched and one was broken. You could hardly see out of them. TRF has everything for a complete rebuild. I only replaced what really looked bad. It was much cheaper than having TRF do the installing.
CJD
Yoda
Offline
They are stitched in at the front and ride in the channels at top and bottom. All you have to do is undo the stitches and slide it out.
Going back in any industrial sewing machine can do it. It has to be able to sew right through the plastic window...so a bit much for the wife's machine. I took mine to a local upholstery shop, who charged $20.
By the way, the design will always scratch. The rubber seal rubs against the soft plastic, so to keep them looking new plan on never sliding them open!
Going back in any industrial sewing machine can do it. It has to be able to sew right through the plastic window...so a bit much for the wife's machine. I took mine to a local upholstery shop, who charged $20.
By the way, the design will always scratch. The rubber seal rubs against the soft plastic, so to keep them looking new plan on never sliding them open!