• Hey Guest!
    British Car Forum has been supporting enthusiasts for over 25 years by providing a great place to share our love for British cars. You can support our efforts by upgrading your membership for less than the dues of most car clubs. There are some perks with a member upgrade!
    **Upgrade Now**
    (PS: Upgraded members don't see this banner, nor will you see the Google ads that appear on the site.)

TR2/3/3A Side Curtain Frames

Share this page

B

BobbyO

Jedi Hopeful
Offline
I don't have the luxury of having the side curtains that came with my car so I am having to try to fit the frames I have to the car. Then I will get them rebuilt. This is not an easy task since the metal is fairly stiff and doesn't want to bend; especially the legs which attach to the door. Does anyone have any suggestions how to best go about fitting the side curtain frames. Any help will be greatly appreciated.
 
Have you tried adjusting the door brackets? They are a bit adjustable. Picture might help to show where the problems are.
Regards, Bob
 
No pictures at present. Just finished fitting a tonneau cover and am letting it sit and stretch out a little before I remove it. Attempted adjusting side curtain frames some time ago. Was doing that while attaching the door brackets. As I remember, the front of the frames were too far inboard. In other words they were hitting the side of the car and seemed to need to be bent out some. I'll attempt pictures in a day or two.
 
Back
Top