• Hi Guest!
    You can help ensure that British Car Forum (BCF) continues to provide a great place to engage in the British car hobby! If you find BCF a beneficial community, please consider supporting our efforts with a subscription.
    There are some perks with a member upgrade!
    **Upgrade Now**
    (PS: Subscribers don't see this gawd-aweful banner
Tips
Tips

T-Series Shorrock supercharger drive belt

Share this page

D

DaveA0524

Freshman Member
Country flag
Offline
I just acquired a complete Shorrock kit for TC/TD except for the drive belts. Anyone else also have one of these setups and have a part number for a belt.
Thanks,
Dave TC0524
 
I have a few blowers, including a long nose to suit a TC/TD. Unfortunately no belts.
Fit the unit to the motor and use a length of small gauge wire and take it to a supplier…they come in 1/2” increments.
 
That's what I'm going to end up doing. I was hoping to have the belts on hand when we get to install the supercharger. It's going to be some time so just trying to collect all the needed parts.
 
Those are a good start. I would recommend staying away from the bloke in Scotland.

Sorry, I don’t have a spare manifold at this time.
 
Grantura_MKI said:
Those are a good start. I would recommend staying away from the bloke in Scotland.

Sorry, I don’t have a spare manifold at this time.
Click to expand...
Is the guy in Scotland still around? The email I have doesn't work and there appears to be no web presence.

Do you have a complete'ish TC/TD blower with drive pulleys? As I'm still trying to figure out exactly what I have I'm looking for the diameter of the 3 groove crank pulley and 2 groove blower pulley. The crank pulley I have is about 4.625" and blower pulley is about 3.495". Does that sound about right?
 
Back
Top