• Hey Guest!
    British Car Forum has been supporting enthusiasts for over 25 years by providing a great place to share our love for British cars. You can support our efforts by upgrading your membership for less than the dues of most car clubs. There are some perks with a member upgrade!
    **Upgrade Now**
    (PS: Upgraded members don't see this banner, nor will you see the Google ads that appear on the site.)

Shims and pins

Share this page

W

Winston

Jedi Hopeful
Offline
Just received new anti squeal shims and new retaining pins for front calipers.
Have'nt had time to check pin diameter, (50/50!), but the anti sqeal shims are different from the shims now on the caliper(took right side apart to learn parts and put back together). Original shims completely square, new one 3/4, pins line up alright.Whats the deal?
 
Can't answer as I have never obtained replacement shims. My recollection of the originals is that they were the same profile as the back of the pad.

FWIW - you might want to use some 'blue goo' anti-squeal stuff behind & between... I didn't (TR4) and soon took them apart a second time to add it as it was 'squealing like a pig'.
 
Back
Top