• Hey Guest!
    British Car Forum has been supporting enthusiasts for over 25 years by providing a great place to share our love for British cars. You can support our efforts by upgrading your membership for less than the dues of most car clubs. There are some perks with a member upgrade!
    **Upgrade Now**
    (PS: Upgraded members don't see this banner, nor will you see the Google ads that appear on the site.)
Tips
Tips

Share your sources for BSF hardware

Share this page

Racer-X-

Racer-X-

Senior Member
Country flag
Offline
Right now, I'm specifically looking for 1/2"-16TPI BSF x 1-1/4" long. Those are Damper mounting bolts for the Vanden Plas 4 Litre Princess Limousine that I'm working on. Moss motors has the 1/12-16TPI BSF x 1-3/4" long ones for the lower wishbone pivot shaft bolts to hold it to the frame. Some Bubba left 3 of the damper mounting bolts off of this one, and used those shorter bolts as replacements for the lower wishbone bolts. They barely engage 3 full turns, and the bolts got pretty corroded and pitted down there. I'm planning to replace all the lower bolts, so at least I can use the 3 "borrowed" bolts to fill in the empty holes for the dampers. But I'd prefer new hardware all around, if I can find it.
 
For one, "British Tools & Fasteners". I have used them quite frequently for nuts, bolts, screws and many other items, such as Taps & Dies. PJ
 
I have some 1/2" BSF Socket Cap screws but they are 2 1/2" long. Could you cut them down? Also have some 5 1/2" ones.

PM me if they will work.

David
 
Back
Top